Petri Dish Rack100mm, 42 Places, PlasticSafely Transports Petri DishesSafely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates
Center divider with built-in han..
Centrifuge Tube RackFor 5ml or 13-16mm Tubes, 40 PlacesSturdy Rack Holds 40 - 5ml TubesDesigned specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm.Made of durable and corrosion resistant white polypropylene plasti..
Maximize storage and save benchtop space with microcentrifuge tube racks that are stackable when loaded or empty. Locking clips firmly connect multiple racks together to form larger arrays that can be easily transported.
•Securely holds 24 microcentrifuge tubes, either 0.5 ml or 1.5 - 2.0ml
•Can be ..
Maximize storage and save benchtop space with microcentrifuge tube racks that are stackable when loaded or empty. Locking clips firmly connect multiple racks together to form larger arrays that can be easily transported.
•Securely holds 24 microcentrifuge tubes, either 0.5 ml or 1.5 - 2.0ml•Can be c..
Molded polystyrene container, with cover, has an internal 12-place support for 1.5 ml microcentrifuge tubes. The space surrounding the tubes is filled with a sealed-in material that maintains the low temperature required for safe storage and transport.
• Maintains a -15ºC temperature for 1½ hours w..
Cryo-Safe Mini Cooler; 0ºCFor 0.5, 1.5ml Tubes, 12 Places, Plastic, 5¾ x 4 x 3¾ in.Benchtop sized cooler holds twelve 15ml centrifuge or cryo vials at a temperature below 0ºC for approximately 3 hours. Store at -20ºC for a few hours until the temperature of the cooler falls below 0ºC.Tubes up t..
Can be used for up to 45 minutes to rapidly and repeatedly chill biological samples for use in molecular biology. Applications such as ethanol precipitation of DNA/RNA samples are made easy, eliminating the inconvenience of traditional dry ice and alcohol baths. After storing the polycarbonate coole..
These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.
•Only the corners of the cuvettes touch the racks
•Accommodate 12 cuvettes of 10mm light path
•Will not scratch quartz cuvettes
•F18516-0787 features Stack Rack™ interlocking end plates f..
These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.
•Only the corners of the cuvettes touch the racks
•Accommodate 12 cuvettes of 10mm light path
•Will not scratch quartz cuvettes•F18516-0787 features Stack Rack™ interlocking end plates fo..
Floating Centrifuge Tube RackFor 5ml Tubes, 24 Places (Pack of 2)Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples.Work on the benchtop, float in the water bathTubes ..
Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath.
•Easy to load
•Microtubes are held snugly and then released when the rack is pressed down on a benchtop
•Dimensions: 11.9 x 7.8cm (4¹¹/₁₆ x 3¹/₁₆")..
These two piece racks include a lower tray to hold water or ice flakes. Choose from two sizes to best suit your needs. • Small rack holds 105, 400 μL microcentrifuge tubes or other tubes with a diameter of 8mm and is stackable.
• Large rack holds 120, 1.5ml microcentrifuge tubes or other tubes wit..
Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.
▪Offered in 5 grid configurations
▪Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70")
▪Polypropylene; autoclavable..
These white polypropylene racks are available in 2 popular grid sizes.
•Open sides make them adaptable for use in a tray of crushed ice
•Dimensions: 12.8 x 10.5 x 4.3cmH (5¼ x 4⅛ x 1¾")
•Steam autoclavable at 121ºC (250ºF)..
These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000ml beaker.
•Special blend of autoclavable polypro..
These No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000ml beaker.
•Special blend of autoclavable polypro..
No-Wire Test Tube Grip RackFor 18-20mm Tubes, 40 PlacesRetainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.Fingers allow simultaneous decanting to save valuable timeSpecially formulized plastic allows the rack t..
Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods.
▪Available in 5 grid sizes to accommodate the full range of laboratory test tubes
▪Steam autoclavable at 121ºC (250ºF)
▪Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")..
A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.
▪Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain t..